Measurement and material estimate
- Specified pieces
- 8
- Stock bars
- 2
- Nominal cut-piece weight
- 39.146 lb
- Nominal purchase weight
- 46.975 lb
- Bars at 0.472 in
- 2 · Offcut 13.123 ft
Cut plan by diameter
- 0.472 in
- 2 × [4 × 8.202 ft] · offcut per bar 6.562 ft
Enter cut lengths already specified in the project. The plan groups diameters, fits longer pieces first and accounts for kerf. Weight uses the nominal circular section and entered density.
Report a problem
How it works
Enter stock length, steel density and kerf.
Add the diameters, cut lengths and counts specified in the design.
Review cut patterns, offcuts and estimated purchase weight.
Frequently asked questions
How are cuts placed?
The calculator sorts each diameter's pieces longest first and uses the first bar with enough space. A piece that uses the full remainder needs no additional cut.
What length should I enter?
Use the developed cut length from the design, including any specified bends and hooks. The tool estimates stock quantities and cuts.